POP UP UNITS

Pop Up Units, or Retractable Service Units as they are sometimes referred to, are fully retractable and discreet units that provide electricity, water or data points to outside spaces.

The outdoor power units provide either a 16A or 32A power supply in both single and three phase plug sockets, all with RCBO protection.

Not only do they supply a safe and secure outdoor power source, but one of their key advantages over more traditional power sources e.g. power generators, is their retractable nature. When you need power you simply raise them (using a separate handle which is supplied with a unit), and when you are finished with them, you simply lower the unit back into the ground.

This feature means they are particularly popular with universities, where it is commonplace for open days and student fairs to be held within campus spaces or next to principle buildings for universities which are located in an urban or city centre location.

Powering such stands can be problematic and quite hazardous where traditional power methods (e.g. petrol generators), can pose various hazards to nearby pedestrians e.g. tripping hazard as well as the risk of electrocution.

CASE STUDY
EXETER UNIVERSITY

Our power units have been specified in many universities across the country. Developers and Architects working on Exeter University designed a range of our PUPS01 pop up power units into the communal space outside the new Forum building.

This area is the central hub of the Streatham Campus, which houses various open days and student events throughout the year.

The pop up units provide a 125A power supply in both single and three phase plug sockets, all with RCBO protection. Another great benefit that was crucial in the initial specification, is that the lids of the outdoor pop up power units can accommodate almost any surface infill e.g. concrete, grass, resin and many more materials.

The units at Exeter University were designed with the paving infill that was used in the communal outdoor area, meaning when lowered into the ground the units appear seamless to the campus communal space.

IN GROUND UNITS

Our In-Ground Units (IGU) provide a continuous outdoor power supply and can be operated even while unattended. Due to the flip lid nature of the units, the lids can be locked down while in operation and with the cables connected to nearby stalls.

So only the power cables protrude out of the unit which can be easily managed with cable guards, ensuring there is less of a tripping hazard for nearby pedestrians.

There are six models to choose from in the In-Ground Units collection – Slim IGU, PUPS 03, PUPS Floorbox, PUPS02 4040, PUPS02 5050, and the PUPS02 7050.

Our In-Ground Power Units are popular with local councils and contractors working on urban projects. They have been installed in many town and city centres across the UK to power market stalls and outdoor events.

CASE STUDY
STAMFORD, LINCOLNSHIRE

Our Flip Lid Power Units were installed in public areas in the town of Stamford, Lincolnshire, for their market events they hold on a weekly basis.

Council Planners were pleased with the power units as not only did they benefit from a safe source of outdoor electricity for the local market stalls, but there was minimal impact on the integrity and beauty of the local area.

POWER BOLLARDS

Our range of power bollards provide an outdoor power supply in elegant street furniture format.

They are available in a wide range of configurations, including three standard diameters of 250mm, 325mm and 500mm. And four styles of bollard tops including parc paris top, domed top, sloping top, and button top.

With our range of power bollards, you have the ability to lock away the power sockets from public interference. Each bollard can provide between 220 and 400 volts and 125A of power.

Our power bollards were installed outside the local civic centre in Gravesham, Kent. It is a popular venue for various outdoor festivals and other events, and there was a requirement for an outdoor power supply to power various stalls and activities.

CASE STUDY
GRAVESHAM, KENT

Pop Up Power specified the Power Bollard. Each slim unit features a button-top style with hatch closure and were located around the perimeter of the area. Each unit was located neatly near a wall and has minimal effect on the surroundings.

The Power Bollard is robust, hard wearing and constructed using AISI 304 or 316 stainless steel. They are available in a mirrored finish, powder painted RAL colours or can even be custom painted with logos.

Pop Up Power can also supply electricity through Flip lid and In Ground Units in a variety of designs to suit the surroundings.

For further information call us on 0208 2270208 or use the link below.

Specified in a button top Supply Bollard with hatch closure, the slim bollards are located around the perimeter area next to walls, and as a result have a limited impact on the outdoor area.

George Parker, Director of Pop Up Power Supplies® commented,

“Our range of Power Bollards were ideal for the area right outside the civic centre for Gravesham Borough Council. The sleek design of the bollards is helped with the brushed stainless steel finish, which complements the surrounding metal railings and street furnishings.

The bollards provide a reliable, secure outdoor power supply, and are totally encased therefore are a safe option for the large footfall the area gets.”